Jiatai
Resource
You are here: Home » About Us » Resource

FAQ

  • Q How To Measure The Quality Of Electric Kettle Thermostat

    A
    1. Set the multimeter to the ohm range (Ω), insert the red test lead into the VΩmA jack, and insert the black test lead into the COM jack.
    2. Remove the three-core plug from the base of the electric kettle and find the two terminals connected to the thermostat (usually L and N)
    3. Use the two test leads of the multimeter to touch the two terminals respectively, and observe the displayed value of the multimeter.
    4. If the displayed value is infinity (OL), it means that the thermostat is in a disconnected state. At this time, the reset button (usually marked on the base) should be pressed to close it.
    5. If the displayed value is a small value (generally between 30-50 ohms), it means that the thermostat is in a closed state. At this time, you should put it into hot water (or heat it with a lighter) to turn it off. open.
    6. If the displayed value is still infinity after pressing the reset button, or the displayed value is still a small value after adding hot water, it means that the thermostat is damaged and needs to be replaced.
    7. If the displayed value changes to a smaller value after pressing the reset button, and changes to infinity after adding hot water, it means the thermostat is working normally.

  • Q How An Electric Iron Thermostat Works

    A
    The work of an electric iron thermostat is a combination of multiple components, including heating elements, resistors and control elements.
    The electric iron itself has a heating system, which provides heat to the device to perform its work. The job of the electric iron thermostat is to receive temperature information through the electric heating element, and then judge the electric heating information through the resistor. If the input heat is greater than the preset threshold value of the electric iron thermostat, the control element controls the resistor to cut off the input of energy, and then the heat of the electric iron is reduced to a certain temperature. If the input heat of the electric iron reaches the threshold, the electric iron thermostat does not work, the resistive element does not prevent the entry of electric energy, and the electric iron is in a continuous heating state.

  • Q How About The Principle Of 360 Degree Thermostat

    A
    Thermostat literally means a device that can control the temperature. In addition to using two methods of heating and cooling to control the temperature, there is another way to control the temperature by cutting off the source of high temperature. The 360-degree thermostat belongs to this kind of equipment.
    The specific principle of the 360-degree thermostat is to use certain components inside the device to sense temperature changes in the surrounding environment, so that the components drive the control switch to cut off or conduct operations such as high temperature sources.

  • Q How To Judge The Quality Of Electric Iron Thermostat

    A
    1. The heating power of the electric iron needs to match the temperature sensing time of the electric iron thermostat. The greater the power, the faster the heating. Therefore, the greater the power, the faster the temperature sensing speed of the electric iron thermostat.
    2. The electric iron thermostat needs to be close to the inside of the electric iron, so it must not affect the outer shell and shape of the electric iron.
    3. The electric iron thermostat itself is an electronic product and will also generate heat. Therefore, if the heating of the electric iron thermostat is too obvious, it will affect the temperature sensing system. In this case, you should choose a non-current electric iron thermostat.
    4. When choosing an electric iron thermostat, you need to consider one thing, and that is the service life. The service life of different temperature slices is different, and the service life of the temperature slice directly affects the service life of the electric iron thermostat.

  • Q How About The Structural Features Of New Electric Kettle Thermostat

    A
    The metal conductive spring of the electric kettle thermostat is fixed to the plastic base through screws. This fixed connection structure is prone to slippage and loosening, resulting in poor contact of the conductive spring even for farmers, affecting the use effect and even preventing normal use.
    At present, a spring positioning structure for the KSD thermostat of an electric kettle has been developed that has a simple and reasonable structure, a large pressing contact surface, a firm pressing connection, and a compact structure. The structure of the KSD thermostat includes a plastic upper base and a rocker. The bottom end of the plastic upper base is equipped with a plug-in part. The plug-in part is equipped with live wire shrapnel and neutral wire shrapnel. The top of the plastic upper base is connected with an insulating cover plate. Both sides of the insulating cover plate are connected. Two heat-sensitive thermostat action components are installed.
    The elastic piece positioning structure of the electric kettle thermostat presses the live line positioning conductive piece and the neutral line positioning conductive piece on the positioning platform through the insulating positioning frame. Since the contact area between the insulating positioning frame and the conductive piece is larger, this structure is compared with the above-mentioned The mentioned screw connection structure is stronger and more stable, effectively overcoming the defect of being unable to fix the conductive sheet due to screw slipping or chipping, achieving the technical effect of firm positioning and extended service life.
Zhejiang Jiatai Electrical Appliance Manufacturing Co., Ltd. was founded in 1985 with 380 employees.

Quick Links

Product Category

Contact Info

   +86-138-6778-2633
   shengdanjie12251
  0577-62352009
   +86-138-6778-2633
  jiatai@jiataichina.cn /  zjjt@jiataichina.cn
  No.6 Linhai West Road, Lin'gang Industrial Zone, Yueqing Bay, Yueqing City, Zhejiang Province,China
Leave a Message
Contact Us
​Copyright © 2024 Zhejiang Jiatai Electrical Appliance Manufacturing Co., Ltd. All Rights Reserved.